In this store we present the full range of Tetrapolar RCCB, see our expert guide with our specialized comments on each product and brand, you can review the circuit breakers by category, characteristic, operation, amperage, type, price. All the catalogs of our specialized store show switches that you can use in your facilities to protect your equipment effectively and safely.
As our interest is to protect life above all, it is necessary to choose between the best electrical protection devices, such as Residual current circuit breakers, which provide extra protection to our houses.
Here we will make a comparison to some of the best 4- pole RCCB on the market. We will analyze the most used
Comparative RCCB Switch Tetrapolar
Here you will find the best prices on the market since combined with quality you can acquire a totally professional durable product.
When looking for the right type of switch for what you need, you will notice that we have a catalog full of all the products you need.
Tetrapolar comparison of 40A 30mA
Best 4 Pole RCCB
1. ABB
- Producto practico
- De la marca: ABB
- Fácil de usar
- Producto de alta calidad
Product description
Pure rccb type A in 40A Idn 30mA Series F200 – 4P – Type A RCCB without magnetothermic releases (? Puri?) They are built according to CEI EN 61008. As there is no built-in magnetothermic device, the pure one? it must be protected against short circuits by means of appropriate switches or fuses. ? Type (detected ground fault waveform):? AC = protection of sinusoidal alternating currents; ? A = direct current and sinusoidal protection with pushbutton components; ? AS = sinusoidal and continuous current protection with pulsed components with intentional delayed release. ? Nominal sensitivity Idn: 0.01? 0.03? 0.1? 0.3? 0.5? Nominal voltage: 230/400 V ac? Dimensions: 2P = 2 modules – 4P = 4 modules? Bi-directional bi-directional cylindrical terminal blocks with double seat,
- Reactivación automática posible
- Adecuado para uso en exteriores (potencia de construcción y distribuidor de aire exterior) hasta -25 ° C
- Fácil de usar
Product description
- Number of poles 4, Nominal voltage 400 V,
- Nominal current 40 A,
- Nominal residual current 30 mA,
- Rated insulation voltage Ui 440 V,
- Mounting type DIN rail,
- Type of fault current A, Selective type no,
- Type with short delay no,
- Short circuit resistance (Icw) 10 kA,
- Resistance to transient currents 0.25 kA, Frequency 50 Hz,
- Additional devices possible yes,
- With locking device yes, Degree of protection (IP) IP20,
- Width in division units 4, P
- installation depth 70.5 mm,
- Pollution degree 2 Extended description for the article Residual current switch 4 poles 40 / 0.03A
Additional description of the article Innovation and maximum quality:
Our product offering comes from the manufacturer Eaton; the item number of this product is EB10658160. The product belongs to the RCCB Protection merchandise group, classified in the Electrical Equipment catalog of the eibabo store. You will be thrilled by the great features and good prices! This recommended item is ordered and purchased very often in our store from all over the world. Our eibabo store has an exclusive 3D / 360 ° view of this product.
Schneider
- Protección contra fugas a tierra
- Número de polos 4P
- Gama Acti 9
Legrand
- Para la protección de espacios secos.
- -
- Peso del producto:0,37 kg.
- Tamaño del producto:155 x 80 x 110 mm.
RX3 4-Pin RCCB Switch, 40 A, 300 mA, product weight: 0.37 kg, for the protection of dry spaces.
Why do you need to install the RCCB
The specific operation that these devices present are very useful. It is impossible to think of a home or company that does not have these devices installed, since they would always be at the expense of damage to electronic devices without proper protection.
Characteristic of Tetrapolar RCCB
The RCCB switch is a special electromechanical switch that, thanks to its internal devices, has the ability to detect the difference between the current absorbed by a consumer device and the return current. When this difference exceeds a value (generally 30 mA), the device interrupts the circuit, cutting off the current supply to the entire installation.
The Tetrapolar RCCB switch is an electromechanical device, that is, its operation involves both electrical and mechanical energy, which is used as an automatic protection system.
This is installed in any electrical installation that has contact with people and its purpose is to protect people from any electrocution they may suffer.
How a Tetrapolar RCCB switch works
To understand how a Tetrapolar RCCB switch works, you must first know how an electrical circuit works. If we have a circuit where an intensity of current enters, it runs through different loads that can be the electrical elements of the home, the intensity of the electrical current that leaves the circuit is the same as that which entered.
Parts of a Tetrapolar RCCB
The parts of a RCCB switch are as follows:
Toroid: Central core of the phase, neutral and residual current coils.
Phase coil: It is the coil through which the incoming current passes to the home to generate the first magnetic field.
Neutral coil: It is where the outgoing current of the home circulates to generate the magnetic field that is equal to that generated by the phase
coil. Residual current coil: It is the coil that generates current in the event of a magnetic field. This residual current is the one that warns that there is a difference between the incoming current and the outgoing current.
Solenoid:It contains a coil through which the residual current passes. In the event that this current exists, it means that the magnetic fields were not canceled, so the input current is different from the output current. This residual current generates a magnetic field that attracts the side of the solenoid, generating a movement that causes the circuit to open.
Other switches equal to the IDs that you can buy in our store:
We present the full range of Tetrapolar RCCB switches, you can search your circuit breaker by category, characteristic, operation, amperage, type, price. All the categories of our specialized store show switches that you can use in your facilities to protect your equipment effectively and safely.
Price of Tetrapolar RCCB
Here you will find the best prices on the market since combined with quality you can acquire a totally professional durable product.
When looking for the right type of switch for what you need, you will notice that we have a catalog full of all the products you need.
Why do you need to install the RCCB
The specific operation that these devices present are very useful. It is impossible to think of a home or company that does not have these devices installed, since they would always be at the expense of damage to electronic devices without proper protection.
Characteristic of Tetrapolar RCCB
The differential switch is a special electromechanical switch that, thanks to its internal devices, has the ability to detect the difference between the current absorbed by a consumer device and the return current. When this difference exceeds a value (generally 30 mA), the device interrupts the circuit, cutting off the current supply to the entire installation.
The Tetrapolar RCCB switch is an electromechanical device, that is, its operation involves both electrical and mechanical energy, which is used as an automatic protection system.
This is installed in any electrical installation that has contact with people and its purpose is to protect people from any electrocution they may suffer.
How a Tetrapolar RCCB switch works
To understand how a Tetrapolar RCCB switch works, you must first know how an electrical circuit works. If we have a circuit where an intensity of current enters, it runs through different loads that can be the electrical elements of the home, the intensity of the electrical current that leaves the circuit is the same as that which entered.
Parts of a Tetrapolar RCCB
The parts of a RCCB switch are as follows:
Toroid: Central core of the phase, neutral and residual current coils.
Phase coil: It is the coil through which the incoming current passes to the home to generate the first magnetic field.
Neutral coil: It is where the outgoing current of the home circulates to generate the magnetic field that is equal to that generated by the phase
coil. Residual current coil: It is the coil that generates current in the event of a magnetic field. This residual current is the one that warns that there is a difference between the incoming current and the outgoing current.
Solenoid:It contains a coil through which the residual current passes. In the event that this current exists, it means that the magnetic fields were not canceled, so the input current is different from the output current. This residual current generates a magnetic field that attracts the side of the solenoid, generating a movement that causes the circuit to open.
Other switches equal to the IDs that you can buy in our store:
Other categories:
Última actualización el 2024-04-18 / Enlaces de afiliados / Imágenes de la API para Afiliados