We present the entire range of Single-Phase RCCB , you can search for them by category, characteristic, operation, amperage, type, price. All the categories of our specialized store show switches that you can use in your facilities to protect your equipment effectively and safely.
Single Phase Circuit Breakers are typically used in a location where less power is required and to run small loads. Three-phase on the other hand, are used in large industries, factories, and in the manufacturing unit where a large amount of power is required.
One of the main differences between single phase and three phase is that single phase consists of one conductor and one neutral wire, while the three phase supply uses three conductors and one neutral wire to complete the circuit.
Next, let’s see a comparison between the best single-phase RCCB on the market so you can weigh up your purchase decision.
The best single-phase RCCB Residual Current Circuit Breaker
1. TOMZN Single-phase RCCB Residual Current Circuit Breaker
- RCCB with protection up to 25 amps, 1P + N. 0.03a. t = <1sg.
- For circuits with single-phase voltage of 220 / 230v 50 / 60Hz (phase and neutral).
- Standard: IEC61009 GB6829. Residual current type AC curve.
- Quality at a reduced price.
TPNL Leakage Protective Switch , used in AC 50Hz / 60Hz single-phase residential circuits, 220/230 V nominal voltage, used to protect people and animals from direct or indirect contact. This product conforms to IEC61009… GB6829… GB / 16917
2. Schneider Single-Phase RCCB Residual Current Circuit Breaker
- Nominal current (In) 40 A
- Earth leakage sensitivity 30 mA
- Network frequency 50/60 Hz
Nominal operating voltage 230/240 V AC 50/60 Hz conforming to IEC 61008-1; 230 V AC 50/60 Hz conforming to EN 61008-1. Voltage Independent Differential Trigger Technology. Rated insulation voltage 440 V AC 50/60 Hz conforming to IEC 61008-1; 440 V AC 50/60 Hz conforming to EN 61008-1. Rated impulse withstand voltage 4 kV conforming to IEC 61008-1; 4 kV according to EN 61008-1.
- Superimmunized differential 40A, 30ma. Class A. 2P
- It guarantees the best differential protection in installations with harmonic problems.
- It guarantees the best differential protection in installations with electronic problems.
- Regulations and certifications: CE, IEC / EN 61008-1. Quality at the best price.
- Total guarantee. If you are not satisfied or it does not meet your expectations, return the product and Amazon will refund your amount without further questions.
Superimmunized class A differential . Prevents harmonics from triggering differential protection by sympathy. It solves practically any problem of differential tripping from electronics in electrical installations.
4. Single-Phase RCCB Residual Current Circuit Breaker
- number of poles = 2
- Nominal voltage = 230 V
- Nominal current = 25 A
- Nominal error current = 0.03 a
- Mounting type = DIN rail
Number of poles 2, Nominal voltage 230 V, Nominal current 25 A, Nominal residual current 30 mA, Mounting type DIN rail, Type of fault current A, Selective type no, Short-time delay type no, Short-circuit resistance ( Icw) 1 kA, Resistance to transient currents 0.25 kA, Frequency 50/60 Hz, Additional devices possible yes, Degree of protection (IP) IP2X, Width in units of division 2, Depth of installation 69 mm Extended description for the article 2-pole 25 / 0.03A residual current switch Additional item description Great value for use and fantastic quality.
This item is produced by the manufacturer ABB; the item number of this product is EB10641454. The product belongs to the Differential Protection merchandise group, classified in the Electrical Equipment catalog of the eibabo store.
This recommended item is ordered and purchased very often in our store from all over the world. An exclusive 3D view is available to you in our store.
In the following list you will find more relevant information about this article: Manufacturer article number: F202A-25 / 0.03 Manufacturer order number: 2CSF202101R1250 EAN / GTIN: 8012542782506 Tariff number: 85363030 Country of origin of the article : Italy Manufacturer’s program:
«System pro M compact» Special features and characteristics Number of poles: 2 Nominal voltage: 230 V Nominal current: 25 A Nominal residual current: 30 mA Mounting type: DIN rail Type of fault current: A Short-circuit resistance (Icw): 1 kA Resistance to transient currents: 0.25 kA Frequency: 50/60 Hz Possible additional devices: yes Degree of protection (IP): IP2X Width in division units: 2
1 Pole + Neutral differential switch, AC class and residential range.
Ideal product for domestic use, where the number of operations is not an influencing factor. Indicated to protect against direct and indirect contacts, it has a nominal intensity of 25 amps, a sensitivity of 30 mA, a breaking capacity of 6 kA and a working voltage of 230V AC.
It offers a cable connection capacity up to 25 mm².
It complies with the international standard EN / IEC61009-1 and is CE & RoHS certified.
Connection capacity up to: 25 mm2
Dimensions: 36mm (2 modules)
No. of poles: 2
Breaking power: 6 kA
Certificates: CE & RoHS
AC class: detects alternating leakage currents
Current intensity: 25 A
Voltage: 400-230V AC
Frequency: 50-60 Hz
Series compatibility: SGBE6K and SGB6K
Regulations: EN / IEC61009-1
| Single Phase Differential Switch |  |
|---|---|
| DESCRIPTION | ✯✯✯✯✯
|
Price of Single-Phase RCCB Residual Current Circuit Breaker
Here you will find the best prices on the market since combined with quality you can acquire a totally professional durable product.
When looking for the right type of switch for what you need, you will notice that we have a catalog full of all the products you need.
Why do you need to install single-phase RCCB Residual Current Circuit Breaker
The specific operation that these devices present are very useful. It is impossible to think of a home or company that does not have these devices installed, since they would always be at the expense of damage to electronic devices without proper protection.
Characteristic of Single-Phase RCCB
The Single-phase RCCBswitch is a special electromechanical switch that, thanks to its internal devices, has the ability to detect the difference between the current absorbed by a consumer device and the return current. When this difference exceeds a value (30 mA), the device interrupts the circuit, cutting off the current supply to the entire installation.
The single-phase RCCB switch is an electromechanical device, that is, its operation involves both electrical and mechanical energy, which is used as an automatic protection system.
This is installed in any electrical installation that has contact with people and its purpose is to protect people from any electrocution they may suffer.
How a single-phase RCCB switch works
To understand how a single-phase RCCB switch works, you must first know how an electrical circuit works. If we have a circuit where an intensity of current enters, it runs through different loads that can be the electrical elements of the home, the intensity of the electrical current that leaves the circuit is the same as that which entered.
Parts of a Single-Phase RCCB
The oroid part: Central core of the phase, neutral and residual current coils.
Phase coil: It is the coil through which the incoming current passes to the home to generate the first magnetic field.
Neutral coil: It is where the outgoing current of the home circulates to generate the magnetic field that is equal to that generated by the phase
coil. Residual current coil: It is the coil that generates current in the event of a magnetic field. This residual current is the one that warns that there is a difference between the incoming current and the outgoing current.
Solenoid:It contains a coil through which the residual current passes. In the event that this current exists, it means that the magnetic fields were not canceled, so the input current is different from the output current. This residual current generates a magnetic field that attracts the side of the solenoid, generating a movement that causes the circuit to open.
Other switches equal to the IDs that you can buy in our store:
We present the entire range of Single-Phase RCCB Switches, you can search for your Electric by category, characteristic, operation, amperage, type, price. All the categories of our specialized store show switches that you can use in your facilities to protect your equipment effectively and safely.
Price of Single-Phase RCCB Switches
Here you will find the best prices on the market since combined with quality you can acquire a totally professional durable product.
When looking for the right type of switch for what you need, you will notice that we have a catalog full of all the products you need.
Why do you need to install the RCCB
The specific operation that these devices present are very useful. It is impossible to think of a home or company that does not have these devices installed, since they would always be at the expense of damage to electronic devices without proper protection.
Characteristic of Single-Phase RCCB
The RCCB switch is a special electromechanical switch that, thanks to its internal devices, has the ability to detect the difference between the current absorbed by a consumer device and the return current. When this difference exceeds a value (in Electrical 30 mA), the device interrupts the circuit, cutting off the current supply to the entire installation.
The Single-Phase RCCB Switch is an electromechanical device, that is, its operation involves both electrical and mechanical energy, which is used as an automatic protection system.
This is installed in any electrical installation that has contact with people and its purpose is to protect people from any electrocution they may suffer.
How a single-phase RCCB switch works
To understand how a single-phase RCCB switch works, you must first know how an electrical circuit works. If we have a circuit where an intensity of current enters, it runs through different loads that can be the electrical elements of the home, the intensity of the electrical current that leaves the circuit is the same as that which entered.
Parts of a Single-Phase RCCB
The parts of a RCCB switch are as follows:
Toroid: Central core of the phase, neutral and residual current coils.
Phase coil: It is the coil through which the incoming current passes to the home to generate the first magnetic field.
Neutral coil: It is where the outgoing current of the home circulates to generate the magnetic field that is equal to that generated by the phase
coil. Residual current coil: It is the coil that generates current in the event of a magnetic field. This residual current is the one that warns that there is a difference between the incoming current and the outgoing current.
Solenoid:It contains a coil through which the residual current passes. In the event that this current exists, it means that the magnetic fields were not canceled, so the input current is different from the output current. This residual current generates a magnetic field that attracts the side of the solenoid, generating a movement that causes the circuit to open.
Other switches equal to the IDs that you can buy in our store:
Other categories:
merlin gerin RCCB switch
1 reviews
Última actualización el 2024-04-26 / Enlaces de afiliados / Imágenes de la API para Afiliados